YUNYANMIX Concrete Curing Agent is manufactured by YUNYAN company, YUNYANMIX is a well branded one of Top 10 for Concrete Curing Agentand new building chemicals in China, for a best supplier and wholesaler of new building chemicals please go through: http://www.yunyanchina.com
Product Description:
Cement concrete curing agent is a surface film-forming polymer emulsion curing agent, which can form a continuous, impervious and airtight curing film on the surface of concrete to prevent water volatilization and achieve the purpose of natural curing. This product has the characteristics of simple and convenient construction for the curing of concrete, without being restricted by conditions, and increasing the surface of the concrete to prevent dust, carbonization, wear resistance, and seepage resistance. This product is water-based, non-burning, non-corrosive, and non-corrosive to steel bars. It is suitable for most concrete projects, especially for curing concrete under dry, anhydrous, hot and windy weather conditions, and reduces the cause of excessive water evaporation. The shrinkage cracking and so on.
Product Features:
1. -- It can be used after being diluted with 3 times of water, saving freight, 1 kg can maintain 4-6 square meters
2. Good film forming effect -- A sealing film can be formed within 1 hour, without changing the exterior color of the concrete.
3. Good water retention -- Protect the concrete surface and internal moisture loss from evaporation, reduce cracking and facilitate the growth of concrete strength in the later stage.
4. Wear-resistant and dust-proof -- After penetrating the surface, the concrete surface layer is more wear-resistant and dust-proof, and durability is improved.
5. Anti-water and anti-carbonization-- Make the concrete surface waterproof and impermeable, reduce the damage of acid rain and ultraviolet carbonization to the concrete.
6. Easy construction -- It is easy to use, spraying, rolling or spraying directly after adding water, it can replace the traditional sprinkling maintenance.
Where to use
1. It is suitable for large-area exposed concrete, such as road pavement, airport runway, floor slab, dam, channel lining, pipe, smoke pipe, chimney, cooling tower.
2. Suitable for various concrete panels and indoor concrete floors that are difficult to sprinkle to maintain
3. It is suitable for curing concrete under dry, dry, hot and windy climatic conditions.
4. Construction in summer, the color is almost white after the film is formed, which can reflect sunlight and heat radiation, thereby effectively reducing the surface temperature of the concrete, generating a lower and uniform temperature energy field, greatly reducing the shrinkage of the concrete caused by temperature unevenness, and reducing surface cracks and cracks. crack. The curing agent can make the concrete have a comprehensive effect of shading and curing.
How to use
1. Concentrated type: can be used after being diluted with 3 times of water; ready to use type: can be used directly. The dosage per square meter is 0.15-0.25 kg (that is, 4-6 square meters can be sprayed per kg)
2. Spread the curing agent evenly on the surface of the concrete by spraying, brushing, rollers, etc., if the concrete surface is rough or has many pores, spray it again for about 20-30 minutes as needed. It is recommended to use the spray method to spray, the curing agent is more uniform and the dosage is saved.
3. The concrete that needs curing should be solidified or demolished before construction, and its surface should be a dry surface layer, free of condensed water, stolen goods and dust. Avoid construction when it rains.
4. Rinse the tools and seal curing agent in time after use
Technical Data:
|
Effective water retention rate |
95% |
|
Color in wet form |
White liquid |
|
Color in dried form |
Transparent |
|
Compressive strength ratio 7d |
97 |
|
28d |
97 |
|
Abrasion kg/m2 |
1.0 |
|
Dry time h |
1.5 |
|
Water solubility after film formation |
Insoluble |
|
Heat resistance of film formation |
passed |
Package: 25kg or 50kg
