YY-112D | D1TE Ready-to-Use Acrylic Tile Adhesive

D1TE Ready-to-Use Acrylic Tile Adhesive is designed for professional construction and finishing work on compatible, properly prepared substrates.

For dependable results, specify D1TE Ready-to-Use Acrylic Tile Adhesive as part of a complete system, verify substrate compatibility, and follow the approved technical data sheet and site trial.

In specification and procurement searches, ready to use tile adhesive is the primary product term for this page. Buyers comparing a ready to use tile adhesive manufacturer can evaluate technical compatibility, packaging, and project support with YUNYAN. For applications requiring premixed tile adhesive, complete a site trial and follow the approved installation method.

Key Features & Benefits

· Easy operation.

· Has high bond strength.

· Has strong water retention.

· Being premixed that can use directly.

· Has good flexibility to withstand shock and vibration.

· Has special formula to reduce material consumption and building load.

Recommended Applications

· D1TE It is suitable to fix various small tiles and mosaic onto conventional substrates, precast.

· concrete panels, concrete, cement renders/screeds.

· Both on wall and floor in interior or.

· Technical parameters.

· YY-112D C1 STANDARD.

· Original tensile adhesive strength(Mpa) ≥0.5.

D1TE Ready-to-Use Acrylic Tile Adhesive

Why Choose YUNYAN

Choose this product when the project brief calls for ready to use tile adhesive with clear technical documentation and consistent supply. YUNYAN supports importers, contractors, and distributors that need a responsive ready to use tile adhesive manufacturer. Where the specification requires premixed tile adhesive, the final system should be confirmed against substrate conditions and service exposure.

Technical Information

Product form	Ready-to-use acrylic paste adhesive
Grade	D1TE / YY-112D, C1 standard
Original tensile adhesion strength	>=0.5 MPa
Tensile adhesion strength after water exposure	>=0.5 MPa
Tensile adhesion strength after thermal ageing	>=0.5 MPa
Tensile adhesion strength after 20-minute open time	>=0.5 MPa
Standard packaging	20 kg/barrel or 25 kg/barrel
Storage period	One year unopened in a cool, dry place

Technical values are typical source-document values and should be checked against the latest approved TDS before publication, specification, or site use.

Application Guide

1. Ensure the substrate is cured, stable, clean, and free from bond-breaking contamination.

2. Mix with clean water or the specified liquid component until smooth; observe slaking, pot-life, and remixing requirements in the TDS.

3. Key the adhesive into the substrate, then comb with an appropriate notched trowel. Back-butter large or profiled units where required.

4. Place tiles within the open time, check transfer and coverage regularly, and protect the installation until grouting and service.

Packaging, Storage & Safety

Packaging	20 kg/barrel or 25 kg/barrel.
Storage / Shelf Life	Keep in a cool, dry place. Unopened product is valid for one year.
Safety	The TDS describes the product as non-toxic, non-flammable, non-radiating, low-odor, and environmentally considerate.