YY-125C | Lithium Concrete Densifier and Sealer
It is widely applied for the old concrete floor, warehouse, factory, shopping mall,parking lot and heavy industry concrete floor.
For dependable results, specify Lithium Concrete Densifier and Sealer as part of a complete system, verify substrate compatibility, and follow the approved technical data sheet and site trial.
In specification and procurement searches, lithium concrete densifier is the primary product term for this page. Buyers comparing a lithium concrete densifier manufacturer can evaluate technical compatibility, packaging, and project support with YUNYAN. For applications requiring concrete densifier for polished floors, complete a site trial and follow the approved installation method.
Key Features & Benefits
· Super wear resistant performance.
· Abrasion resistance and impact resistance.
· Good fouling resistance and dust proof performance.
· Daily maintenance is simple and easy.
· Ready to use, user friendly.
Recommended Applications
· It is widely applied for the old concrete floor, warehouse, factory, shopping mall,parking lot and heavy industry concrete floor.
· Usage: 0.04kg/㎡(two coats).
· Industrial concrete floors.
· Warehouses and logistics areas.
· Roads and pavements.
· Commercial slabs.
Why Choose YUNYAN
Choose this product when the project brief calls for lithium concrete densifier with clear technical documentation and consistent supply. YUNYAN supports importers, contractors, and distributors that need a responsive lithium concrete densifier manufacturer. Where the specification requires concrete densifier for polished floors, the final system should be confirmed against substrate conditions and service exposure.
Technical Information
|
Status |
Liquid form |
|
Color |
Transparent liquid, Matte after dry |
|
Construction |
By spray,brush or roll |
|
thinner |
5 times of water (1st coat), 6 times of water(2nd coat) |
|
VOC g/L |
<2.0 passed |
|
Pb mg/kg |
<10 passed |
|
Cd mg/kg |
<2 passed |
|
Cr mg/kg |
<2 passed |
|
Hg mg/kg |
<2 passed |
|
PH value (25℃) |
2 |
|
Moh’s hardness test grade |
5 |
|
Wear resistant degree % |
349% |
|
Shelf life |
12 months |
|
Condition on site |
5-40℃ |
Technical values are typical source-document values and should be checked against the latest approved TDS before publication, specification, or site use.
Application Guide
1. Assess the concrete condition, age, moisture, porosity, strength, and contamination before work begins.
2. Prepare the surface and product according to the TDS; complete a site trial to confirm absorption and finish.
3. Apply evenly at the specified stage of concrete finishing or curing, avoiding puddles, missed areas, and contamination.
4. Protect the treated area until dry or cured, then inspect the surface before opening it to service.
Packaging, Storage & Safety
|
Storage / Shelf Life |
Non-warranty: Because the storage, handling and application of the material is beyond |