YY-117 | C1T Mosaic Adhesive
C1T Mosaic Adhesive is designed for professional construction and finishing work on compatible, properly prepared substrates.
For dependable results, specify C1T Mosaic Adhesive as part of a complete system, verify substrate compatibility, and follow the approved technical data sheet and site trial.
In specification and procurement searches, mosaic adhesive is the primary product term for this page. Buyers comparing a mosaic adhesive manufacturer can evaluate technical compatibility, packaging, and project support with YUNYAN. For applications requiring glass mosaic adhesive, complete a site trial and follow the approved installation method.
Key Features & Benefits
· Premixed products, only add water.
· Remain open time, non slip, good adhesion strength.
· Water resistant, fast harden.
· Long lasting service for 25 years.
· Eco friendly and user friendly.
Recommended Applications
· It is suitable to fix the mosaic onto the wall and floor of conventional substrates, precast concrete.
· panels, concrete, cement renders/screeds.
· Indoor and outdoor use.
· Usage: 1.2kg/mm/㎡.
· Delivery : 15-20 days.
· MOQ: 1000bags.
Why Choose YUNYAN
Choose this product when the project brief calls for mosaic adhesive with clear technical documentation and consistent supply. YUNYAN supports importers, contractors, and distributors that need a responsive mosaic adhesive manufacturer. Where the specification requires glass mosaic adhesive, the final system should be confirmed against substrate conditions and service exposure.
Technical Information
|
Status |
Single component |
|
Powder |
white |
|
Open time |
25min |
|
Pot life |
60min @25℃ |
|
Setting time |
≥4hours |
|
Construction |
Scrape |
|
Initial tensile adhesion strength |
6Mpa |
|
Initial tensile adhesion strength in water |
0Mpa |
|
Open time: Tensile adhesion strength after not less than 20min |
3Mpa |
|
Slip mm |
4 |
|
Shelf life |
12 months |
|
Condition on site |
5-40℃ |
|
Packaging |
20kg/bag or 25kg/bag |
Technical values are typical source-document values and should be checked against the latest approved TDS before publication, specification, or site use.
Application Guide
1. Ensure the substrate is cured, stable, clean, and free from bond-breaking contamination.
2. Mix with clean water or the specified liquid component until smooth; observe slaking, pot-life, and remixing requirements in the TDS.
3. Key the adhesive into the substrate, then comb with an appropriate notched trowel. Back-butter large or profiled units where required.
4. Place tiles within the open time, check transfer and coverage regularly, and protect the installation until grouting and service.
Packaging, Storage & Safety
|
Packaging |
20kg/bag or 25kg/bag |