YY-116A | C2TES2 Two-Component Large-Format Tile Adhesive
YY- 116A is a a premium, flexible, high performance, double component bagged polymer cement powder to be mixed with acrylic resin to install large size of tile with low absorption using the thin-set method of installation.
For dependable results, specify C2TES2 Two-Component Large-Format Tile Adhesive as part of a complete system, verify substrate compatibility, and follow the approved technical data sheet and site trial.
Key Features & Benefits
· Interior and exterior use.
· Double component, high bonding strength and waterproof.
· flexible and non sag.
· Polymer cement based, add water only.
· Green product, low VOC.
Recommended Applications
· It is suitable for interior and exterior installation of granite, marble and all kinds of tiles’ bonding.
· Concrete masonry.
· Cement mortar beds.
· Cement plaster.
· Ceramic tile and stones.
· Suitable waterproof membranes.
Technical Information
|
Status |
Double component |
|
Powder |
Gray or white |
|
Pot life |
60min @25℃ |
|
Setting time |
≥4hours |
|
Construction |
Scrape |
|
Initial tensile adhesion strength |
0Mpa |
|
Initial tensile adhesion strength after water immersion |
7Mpa |
|
Open time: Tensile adhesion strength after not less than 10min |
0Mpa |
|
Open time: Tensile adhesion strength after not less than 20min |
8Mpa |
|
Extended open time: Tensile adhesion strength after not less than 30min |
7Mpa |
|
Tensile adhesion strength after freeze -thaw cycles |
5Mpa |
|
Tensile adhesion strength after heat aging |
7Mpa |
|
Waterproof performance test |
passed |
|
Deformation test |
passed |
|
Slip mm |
4 |
|
Shelf life |
12 months |
|
Condition on site |
5-40℃ |
Technical values are typical source-document values and should be checked against the latest approved TDS before publication, specification, or site use.
Application Guide
1. All surfaces should be between 4°C and 32°C and structurally sound, clean and free.
2. of all laitance, dirt, oil, grease, loose peeling paint, concrete sealers or curing compounds.
3. Dry, dusty concrete slabs or masonry should be dampened and excess water swept off.
4. Installation.
5. may be made on a damp surface.
Packaging, Storage & Safety
|
Storage / Shelf Life |
SHELF LIFE: Sealed bags are guaranteed to be 12 months if stored at between 5℃ to 40℃. Non-warranty: Because the storage, handling and application of the material is beyond YUNYAN COMPANY control, we can accept no liability for the results obtained. YUNYAN COMPANY sole limited warranty is the product meets the manufacturing specifications in effect at time of manufacturing. There is no warranty of merchantability or fitness for use, nor any other express or implied warranty. |