A short video about Yunyan details, snapshot of the office, conference hall, lab room, workshop and the beautiful lake next to factory.
YUNYAN cement based polymer adhesive for interior and exterior tile and marble installation
YUNYAN Epoxy Mosaic Grout is suitable for mosaic joins filler interior and exterior
Wall putty are for indoor and outdoor concrete wall base leveling, smoothing, and fineness, to cover the unevenness and micro pores in plastered surfaces and to make the walls/ceilings ready for paint ing, there are base coat and skim coat wall putty, both have strong cohesive force with base plane and paint primer. When use, add water only, stirring to be an appropriate and consistent paste form, then apply the mixed paste on the wall by spray gun evenly, smooth and level the wall putty skim coat layer by scraper. The base coat wall putty can be applied to level the cement concrete base and old mosaic wall directly.
Yunyan new technology and construction thin-set plaster mortar is for filling the brick and block on the concrete cement wall, it is also the base coat wall putty for interior and external dry wall base leveling, can be applied by scraping or plastering, minimum thickness is only 2mm, no need to put steel mesh inside for reinforcement. Patch where it is necessary with base coat wall putty for one time, such as the hole and uneven substrate, then apply polishing skim coat putty in one direction, it means you must apply wall putty with scraper from up to down or from down to up back and forth, but just one direction from start to the end. You can also use the scraper to apply the mortar on the wall.
Acrylic Textured paint is water based, paste state, ready to use, premixed acrylic polymer product with high solids, highly flexible aggregate textured finish coating. It is designed for application on dry wall, masonry, and other properly prepared surfaces where durability, weather resistance and a decorative appearance is desired for interior and exterior. First to level the base plane with base coat wall putty, the final setting time is 48 hours. Second to apply the primer to seal and solid the substrate, dry time is 12 hours. Third to scraper the textured paint onto the wall for 2 times. Forth to use a special wood block to scratch and rub on the paint to make the surface rough, wait for 24 hours until it is dry totally. Final to apply the transparent protection paint to make the textured paint more durable.
Yunyan Cement base stucco paint is a kind of environmental wall decoration material suitable for indoor and outdoor use, it is dry powder state, main ingredients are silicate, aluminates, starch, wood fiber and other polymer additives. It is pure green, formaldehyde free, fire resistant, can absorb odor and adjust the air temperature humidity. Widely used to villas, bars, cafes, shops, bathrooms, offices and other public fashion spaces for interior and exterior.
The granite wall paint is one kind of the textured stucco paints, it is organic, anti – crack, waterproofing, natural stone material, has good cohesive force, long lasting service life and color no fade. It is suitable for the external decoration of hotel, hospital, school, shopping mall, villa, factory, business building, and can also be applied as the exterior insulation base coat.
First to apply putty on the substrate to make it smooth, level and solid, wait for 48 hours. Second to roll or brush the primer on the base plane, wait for 12 hours. Third to spray stone paint for one or two times, spray distant is 50-80cm, dry time is 24 hours. Forth to apply top transparent protection paint, dry time 12 hours.
The construction procedures of the cement stucco paint are main two steps, the bottom layer and finished layer, the construction of the bottom layer is the same as the normal wall paint steps completely, the seal primer firstly. To the finished layer, first to clean all the tools before construction to avoid color vestige, color mixer and quality defects. Second to pour a bag of pigment into 2.5kg water and mix evenly, filter the mixture into a 18L bucket, then pour 10kg of the cement stucco powder into the 18L bucket, stir with electric stirrer until the water and powder to be an appropriate and consistent paste state, leave the paste for 5 minutes. Third to use a scrape knife to scrape the paste onto the wall as thin as possible, when the 1st layer dried then can start to scrape the 2nd layer, the standard of the dryness is that there is nothing on your fingers if you touch the paint on the wall, initial dry is 5 minutes at 25 degree in normal conditions on site. Forth to process the texture and patterns, r