YY-172 | Anti-Static Self-Leveling Epoxy Floor Coating
In view of the special requirements of precision electronics, precision instruments and precision meters, the use of epoxy resin anti-static floor construction can effectively reduce the rework rate and loss of precision electronic products, and reduce the harm of carrying low-voltage static electricity to precision electronic products in the production process.
For dependable results, specify Anti-Static Self-Leveling Epoxy Floor Coating as part of a complete system, verify substrate compatibility, and follow the approved technical data sheet and site trial.
In specification and procurement searches, anti static epoxy floor is the primary product term for this page. Buyers comparing a anti static epoxy floor manufacturer can evaluate technical compatibility, packaging, and project support with YUNYAN. For applications requiring ESD epoxy flooring, complete a site trial and follow the approved installation method.
Key Features & Benefits
· Made from solvent-free high-grade epoxy resin and premium curing agents, it features a smooth, aesthetically pleasing surface that achieves a mirror-like finish.
· It is resistant to corrosion by acids, alkalis, salts, and oils, especially strong alkalis.
· It also offers excellent wear resistance, pressure resistance, impact resistance, and a certain degree of elasticity.
· Material properties: Solvent-cured reaction-hardening type, with a beautiful surface luster and excellent electrical conductivity.
· solvent-cured epoxy resin and conductive materials.
· The thickness is more than 1mm and the service life is more than 8 years.
Recommended Applications
· It is suitable for high-cleanliness, aesthetic, dust-free, and sterile environments in the electronics and microelectronics industries where anti-static measures are required.
· Factories and workshops.
· Warehouses and parking areas.
· Retail and commercial interiors.
· Garages and service areas.
· Decorative residential floors.
Why Choose YUNYAN
Choose this product when the project brief calls for anti static epoxy floor with clear technical documentation and consistent supply. YUNYAN supports importers, contractors, and distributors that need a responsive anti static epoxy floor manufacturer. Where the specification requires ESD epoxy flooring, the final system should be confirmed against substrate conditions and service exposure.
Technical Information
|
Dry Time (Table Dry) |
≤6h |
|
Dry Time (Solid Dry): |
≤24h |
|
Tensile Strength: |
≥9 Mpa |
|
Bending Strength |
≥7 Mpa |
|
Adhesion strength: |
≥3.0 Mpa |
|
Compressive Strength: |
≥52 Mpa |
|
Shore D Hardness: |
≥By ≥61 |
|
Flow Leveling: |
≥5min |
|
Wear Resistance (750g/500r, weight loss): |
≤0.0260% |
|
Anti-slip （Coefficient of frictional drag） |
52 |
|
Sulfuric Acid Resistance: |
No noticeable discoloration after 30 days |
|
25% Sodium Hydroxide Resistance: |
No abnormalities after 30 days |
|
31% Salt Water Resistance: |
No abnormalities after 30 days |
|
Gasoline Resistance (No.120) Adhesion Strength: |
≥2Mpa |
|
Wear resistance: |
15mg (on wear wheel CS-17, wheel weight 1,000gf{9.8N) after 1,000 rotations. |
|
Impact resistance: |
1Kgw/1mh without cracking, spalling, or deformation. |
|
Hardness: |
1H-2H |
|
Anti-static performance |
Surface resistance value | 3x10⁷ |
|
Anti-static performance |
Cubic resistance value | 6x10⁶ |
Technical values are typical source-document values and should be checked against the latest approved TDS before publication, specification, or site use.
Application Guide
1. Step 1, base surface treatment,.
2. Step 2, brush sealing primer.
3. Step 3, scrape middle layer paint.
4. Step 4, lay conductive copper mesh.
5. Step 5, apply conductive putty, and apply anti-static self-leveling epoxy color paint once.