YY-116F | C2TFS1 Rapid-Set Tile Adhesive
YUNYAN YY-116F is a rapid-setting C2TFS1 cementitious tile adhesive for fast-track ceramic, porcelain, and stone installation. It is designed to combine high adhesion, reduced slip, deformability, and early strength where short grouting or return-to-service schedules are required.
For dependable results, specify C2TFS1 Rapid-Set Tile Adhesive as part of a complete system, verify substrate compatibility, and follow the approved technical data sheet and site trial.
In specification and procurement searches, fast setting tile adhesive is the primary product term for this page. Buyers comparing a fast setting tile adhesive manufacturer can evaluate technical compatibility, packaging, and project support with YUNYAN. For applications requiring rapid set tile adhesive, complete a site trial and follow the approved installation method.
Key Features & Benefits
· Polymer-modified bonding performance for ceramic, porcelain, mosaic, stone, or large-format tile according to grade.
· Workable consistency for notched-trowel application on properly prepared walls and floors.
· Designed to provide dependable contact and transfer when correct trowel size and coverage are used.
· Suitable for professional installation in residential, commercial, and renovation projects.
· Available in project packaging for efficient site handling.
Recommended Applications
· 2kg/mm/m2, one bag 20kg can cover 5-6 square meters at 3mm thickness adhesive.
· Sealed bags are guaranteed to be 12 months if stored at between 5℃ to 40℃.
· All surfaces should be between 4°C and 32°C and structurally sound, clean and free.
· of all laitance, dirt, oil, grease, loose peeling paint, concrete sealers or curing compounds.
· Dry, dusty concrete slabs or masonry should be dampened and excess water swept off.
· Installation.
Why Choose YUNYAN
Choose this product when the project brief calls for fast setting tile adhesive with clear technical documentation and consistent supply. YUNYAN supports importers, contractors, and distributors that need a responsive fast setting tile adhesive manufacturer. Where the specification requires rapid set tile adhesive, the final system should be confirmed against substrate conditions and service exposure.
Technical Information
|
Product type |
Rapid-setting polymer-modified cementitious tile adhesive |
|
Standard packaging |
20 kg/bag or 25 kg/bag |
|
Available colors |
Gray or white |
|
Mixing water |
4.6-5.2 L per 20 kg bag |
|
Open time (EN 1346) |
>15 minutes |
|
Pot life |
>40 minutes |
|
Ready to grout |
3-4 hours |
|
Time to light traffic |
4 hours |
|
Transverse deformation (EN 12002) |
>=2.5 mm and <5 mm |
|
Initial tensile adhesion strength (EN 1348) |
>=1.0 N/mm2 |
|
Tensile adhesion after water immersion (EN 1348) |
>=1.0 N/mm2 |
|
Tensile adhesion after heat ageing (EN 1348) |
>=1.0 N/mm2 |
|
Tensile adhesion after freeze-thaw cycles (EN 1348) |
>=1.0 N/mm2 |
|
Early tensile adhesion strength at 4 hours (EN 1348) |
>=1.0 N/mm2 |
|
Slip (EN 1308) |
<=0.5 mm |
|
Typical coverage |
Approx. 2 kg/mm/m2; a 20 kg bag covers 5-6 m2 at 3 mm thickness |
|
Shelf life |
12 months in sealed bags when stored between 5 C and 40 C |
Technical values are typical source-document values and should be checked against the latest approved TDS before publication, specification, or site use.
Application Guide
1. Apply adhesive to the substrate with the flat side of the trowel, pressing firmly to work into surface.
2. Comb on additional adhesive with the notched side.
3. Joint Treatment.
4. Grout after a minimum of 4 hours curing at 23°C or when dry.
5. YY-315H2 water borne epoxy grout or YY-312 sanded cement based grout are recommended.
Packaging, Storage & Safety
|
Packaging |
20 kg/bag or 25 kg/bag; gray or white. |
|
Storage / Shelf Life |
12 months in sealed bags when stored between 5 C and 40 C. Protect from moisture. |