YY-150A/B/C/D/E | Solvent-Based Epoxy Floor Coating System
Product Overview
It is suitable for airport, subway station, dining room, lounge, office area, food production workshop and the hospital, the school laboratory, etc. (indoor use only)
For dependable results, specify Solvent-Based Epoxy Floor Coating System as part of a complete system, verify substrate compatibility, and follow the approved technical data sheet and site trial.
In specification and procurement searches, epoxy floor paint is the primary product term for this page. Buyers comparing a epoxy floor paint manufacturer can evaluate technical compatibility, packaging, and project support with YUNYAN. For applications requiring industrial epoxy floor coating, complete a site trial and follow the approved installation method.
Key Features & Benefits
· Anti-acid and anti-alkali, chemical corrosion resistance.
· High strength, wear-resistance.
· Antimicrobial, long lasting service life for 20 years.
· Use friendly.
Recommended Applications
· It is suitable for airport, subway station, dining room, lounge, office area, food production workshop and the hospital, the school laboratory, etc. (indoor use only).
· Usage: YY-150A 0.06 kg/㎡ ;.
· YY-150B 0.06kg/㎡ (For one layer).
· YY-150C 0.12 kg/㎡ ;.
· YY-150D 0.04kg/㎡ (For one layer).
· Construction: By roll or brush.
Why Choose YUNYAN
Choose this product when the project brief calls for epoxy floor paint with clear technical documentation and consistent supply. YUNYAN supports importers, contractors, and distributors that need a responsive epoxy floor paint manufacturer. Where the specification requires industrial epoxy floor coating, the final system should be confirmed against substrate conditions and service exposure.
Technical Information
|
Status |
Double component |
|
Color |
Customized |
|
YY-150A : YY-150B |
1:1 |
|
YY-150C : YY-150D |
3:1 |
|
Construction |
By brush or roll |
|
Specular gloss |
≥By ≥90 |
|
Moh’s hardness |
≥2 |
|
Abrasion resistant load 750g Rotate 300min |
≤0.02 |
|
Compressive strength Mpa |
≥75 |
|
Initial setting time |
≤4h |
|
Final setting time |
≤2d |
|
Best strength to achieve |
≤7d |
|
Water resistant test 30d |
Passed |
|
Alkalic resistant test 30d |
Passed |
|
Acid resistant test 30d |
Passed |
|
Heat resistant in warm water 30d |
Passed |
|
Shelf life |
12 months |
|
Condition on site |
5-40℃ |
Technical values are typical source-document values and should be checked against the latest approved TDS before publication, specification, or site use.
Application Guide
1. Mechanically prepare the concrete to remove laitance, weak material, coatings, oil, and contamination; repair cracks and defects.
2. Verify substrate moisture, strength, flatness, and environmental conditions before application.
3. Mix components accurately and apply the specified primer, body coat, decorative media, and top coat within their working times.
4. Keep the area clean and closed to traffic until the system has reached the required cure for service.