YY-1000 | Interior Eggshell Wall Finish Paint
Interior Eggshell Wall Finish Paint is designed for professional construction and finishing work on compatible, properly prepared substrates.
For dependable results, specify Interior Eggshell Wall Finish Paint as part of a complete system, verify substrate compatibility, and follow the approved technical data sheet and site trial.
In specification and procurement searches, interior eggshell paint is the primary product term for this page. Buyers comparing a interior eggshell paint manufacturer can evaluate technical compatibility, packaging, and project support with YUNYAN. For applications requiring washable interior wall paint, complete a site trial and follow the approved installation method.
Key Features & Benefits
· Ready to use, water based product.
· Excellent adhesion and alkali resistance .
· Waterproof and long lasting service life for 10 years.
· Excellent covering performance.
· Premixed acrylic polymer product, Eco friendly and user friendly.
Recommended Applications
· It is suitable for interior decoration, wall surface (e.g., plaster wall, asbestos board, brick wall, fiber board).
· Usage: 0.25kg/㎡(two times).
· Delivery : 15-20 days.
· MOQ: 100barrels.
Why Choose YUNYAN
Choose this product when the project brief calls for interior eggshell paint with clear technical documentation and consistent supply. YUNYAN supports importers, contractors, and distributors that need a responsive interior eggshell paint manufacturer. Where the specification requires washable interior wall paint, the final system should be confirmed against substrate conditions and service exposure.
Technical Information
|
Status |
Liquid form |
|
Color |
Milky white or color |
|
Open time |
30min |
|
Pot life |
<4 hours @25℃ |
|
Setting time |
8 hours |
|
Construction |
Spray or roll |
|
Contrast ratio (white or light color) |
≥0.9 |
|
Washablity |
≥100 times |
|
Low temperature stability (cycle test 3 times) |
passed |
|
Anti-alkalic test (24h) |
passed |
|
VOC 8.6g/kg |
passed |
|
Formaldehyde 18mg/kg |
passed |
|
Heavy metal content |
passed |
|
Shelf life |
12 months |
|
Condition on site |
5-40℃ |
|
Humidity |
≤10 |
Technical values are typical source-document values and should be checked against the latest approved TDS before publication, specification, or site use.
Application Guide
1. Prepare the substrate by removing rust, dust, grease, loose coatings, salts, and other contamination.
2. Stir or mix the product thoroughly; thin only with the approved material and within the TDS limit.
3. Apply the specified number of even coats by brush, roller, or spray, respecting recoat windows and target film build.
4. Protect the coating from rain, condensation, dust, and service loads until fully cured.