Best Magic Terrazzo Coating Non-slip and Easy to Clean From YUNYAN China manufacturer and supplier

JUTOMEI Magic Terrazzo coating is manufactured by YUNYAN company, JUTOMEI is a well branded one of Top 10 for Magic Terrazzo coating and new building chemicals in China, for a best supplier and wholesaler of new building chemicals please go through: http://www.yunyanchina.com

JUTOMEI MAGIC TERRAZZO COATING are highly durable color chips for marble quartz floor providing superior durability and impact resistance. This resinous flooring system incorporates a double broadcast of small colored marble pieces with JUTOMEI MAGIC TERRAZZO COATING systems and polyurethane top coatings.

PRODUCT DESCRIPTION:

The system provides flooring solutions for the most demanding heavy-traffic environments, specifically in areas that require significant traction. A uniform marble quartz floor system creates a highly durable floor and the UV-stable marble sand granules ensure high traction and an attractive finish.

PRODUCT FEATURES

§ High traction coefficient

§ Wide assortment of custom finishes

§ Interior or exterior use

§ Superior durability and impact resistance

§ Rapid return to service

§ Cures in cold temperatures

§ Garages

§ Concrete floors

§ Ceramic tile or porcelain tile floor

§ Commercial kitchens

§ Industrial floors

§ Residential and commercial floors

§ Veterinarian clinics

§ Locker rooms

§ Restrooms

§ Patio floors

§ Exterior decks

§ Walkways

§ High-traffic areas

§ External and internal wall

TECHNICAL DATA

DRYING TIME TABLE

Primer or sanded primer: 20kg/20L bucket, 32/48 buckets in a pallet.

Acrylate Polymer marble quartz coating(single component): 25kg/20L bucket,32/48 buckets in a pallet.

Epoxy marble sand coating(double component):

Medium/fine sand: 25kg bucket,60/48 buckets in a pallet. Adhesive : 3kg per kit.

Coarse sand: 25kg bucket,60/48 buckets in a pallet. Adhesive : 3kg per kit.

1K Polyurethane top coat sealer: 20kg/20L

2K Polyurethane top coat sealer: 5kg per kit, base: 4kg and hardener: 1kg.

Fine sand: 4kg/m2 @3mm

Medium sand: 8kg/m2 @5mm

Coarse sand: 20kg/m2 @5mm

Fine sand : Epoxy adhesive = 20 : 1 (as weight)

Medium sand : Epoxy adhesive = 20 : 1 (as weight)

Coarse sand : Epoxy adhesive = 25 : 1 (as weight)

Special coarse sand: Epoxy adhesive = 30 : 1 (as weight)

Epoxy Floor Kit, Base A : Base B = 2 : 1

SURFACE TREATMENT:

Concrete surfaces must be cured for at least 28 days at a temperature of 21°C/70°F Celsius or higher with a relative humidity of 50%.

For maximum performance, concrete surfaces that have any existing oil, moisture, sand, dust, laitance, and other foreign matter must be removed from the surface before starting the application

COATING CONDITIONS:

Atmosphere Temperature: 5-35°C/41-95°F, Surface Temperature: 40°C/104°F Celsius or below, Relative Humidity: 80% or less, Moisture Content in Concrete: 6% or less. Due to the nature of the epoxy material, a difference in color tint may be shown over time if the

existing surface is a brighter color. The degree of occurrence for yellowing varies depending on the long-term exposure to sunlight or

the usage of extreme indoor lighting fixtures, etc. Applying this material at thinner coverage levels than the recommended amount may

cause a further delay in the epoxy drying time, decline hardness abilities, or cause skid marks, whitening streaks, etc.

COATING METHOD:

Reinforce surface cracks, crevices, and joints between walls and floors with an epoxy joint filler product or putty before the first coat.

Apply with an industrial-grade floor trowel squeegee. Care should be taken since problems such as cratering may occur upon applying coating too thin. (2mm or less - 1 time)

Sanded primer is a must upon the ceramic or porcelain tile floor before applying the epoxy marble sand coating. It helps to cast over smoothly