JUTOMEI Magic Terrazzo coating is manufactured by YUNYAN company, JUTOMEI is a well branded one of Top 10 for Magic Terrazzo coating and new building chemicals in China, for a best supplier and wholesaler of new building chemicals please go through: http://www.yunyanchina.com
JUTOMEI MAGIC TERRAZZO COATING are highly durable color chips for marble quartz floor providing superior durability and impact resistance. This resinous flooring system incorporates a double broadcast of small colored marble pieces with JUTOMEI MAGIC TERRAZZO COATING systems and polyurethane top coatings.
PRODUCT DESCRIPTION:
The system provides flooring solutions for the most demanding heavy-traffic environments, specifically in areas that require significant traction. A uniform marble quartz floor system creates a highly durable floor and the UV-stable marble sand granules ensure high traction and an attractive finish.
PRODUCT FEATURES
§ High traction coefficient
§ Wide assortment of custom finishes
§ Interior or exterior use
§ Superior durability and impact resistance
§ Rapid return to service
§ Cures in cold temperatures
§ Garages
§ Concrete floors
§ Ceramic tile or porcelain tile floor
§ Commercial kitchens
§ Industrial floors
§ Residential and commercial floors
§ Veterinarian clinics
§ Locker rooms
§ Restrooms
§ Patio floors
§ Exterior decks
§ Walkways
§ High-traffic areas
§ External and internal wall
TECHNICAL DATA
|
Test Item |
Result |
|
Specific gravity of epoxy adhesive |
1.09 |
|
Solid content % |
100% |
|
Dilution ration |
No dilution,thinner not applicable |
|
Bonding strength 28d Mpa |
≥1.0 N/mm² |
|
Bonding strength after freeze and thaw 28d Mpa
|
≥1.0 N/mm² |
|
Bonding strength after water immersion 28d Mpa |
≥1.0 N/mm² |
|
Tensile strength 28d Mpa |
≥1.0 N/mm² |
|
Compressive strength 28d Mpa |
≥50 N/mm² |
|
Flexual strength 28d Mpa |
≥6 N/mm² |
|
Shore D Hardness |
≥75 |
|
Wear resistant 300,000 scratches test |
Passed |
|
Waterproof grade |
1 |
|
Fireproof grade |
B1 |
|
Elongation rate |
0% |
|
UV resistant test |
No color change, pass |
|
VOC content |
≤2g/L |
|
Size of fine sand |
1.5mm |
|
Size of medium sand |
5mm |
|
Size of coarse sand |
5mm |
|
Shelf life in a unopened container |
24 months |
DRYING TIME TABLE
|
ITEM |
41F/5℃ |
68F/23℃ |
86F/30℃ |
|
Set to touch |
10 hours |
2.5hours |
2 hours |
|
Dry through |
32 hours |
16 hours |
10 hours |
|
Over coat(Max.) |
48 hours |
24 hours |
18 hours |
|
Final setting time |
9 days |
4 days |
3 days |
|
Pot life |
40 minutes |
20 minutes |
10 minutes |
|
Above pot life and follow-up coating time have been measured under laboratory conditions and may vary depending on the construction site.
|
|||
Primer or sanded primer: 20kg/20L bucket, 32/48 buckets in a pallet.
Acrylate Polymer marble quartz coating(single component): 25kg/20L bucket,32/48 buckets in a pallet.
Epoxy marble sand coating(double component):
Medium/fine sand: 25kg bucket,60/48 buckets in a pallet. Adhesive : 3kg per kit.
Coarse sand: 25kg bucket,60/48 buckets in a pallet. Adhesive : 3kg per kit.
1K Polyurethane top coat sealer: 20kg/20L
2K Polyurethane top coat sealer: 5kg per kit, base: 4kg and hardener: 1kg.
Fine sand: 4kg/m2 @3mm
Medium sand: 8kg/m2 @5mm
Coarse sand: 20kg/m2 @5mm
Fine sand : Epoxy adhesive = 20 : 1 (as weight)
Medium sand : Epoxy adhesive = 20 : 1 (as weight)
Coarse sand : Epoxy adhesive = 25 : 1 (as weight)
Special coarse sand: Epoxy adhesive = 30 : 1 (as weight)
Epoxy Floor Kit, Base A : Base B = 2 : 1
SURFACE TREATMENT:
Concrete surfaces must be cured for at least 28 days at a temperature of 21°C/70°F Celsius or higher with a relative humidity of 50%.
For maximum performance, concrete surfaces that have any existing oil, moisture, sand, dust, laitance, and other foreign matter must be removed from the surface before starting the application
COATING CONDITIONS:
Atmosphere Temperature: 5-35°C/41-95°F, Surface Temperature: 40°C/104°F Celsius or below, Relative Humidity: 80% or less, Moisture Content in Concrete: 6% or less. Due to the nature of the epoxy material, a difference in color tint may be shown over time if the
existing surface is a brighter color. The degree of occurrence for yellowing varies depending on the long-term exposure to sunlight or
the usage of extreme indoor lighting fixtures, etc. Applying this material at thinner coverage levels than the recommended amount may
cause a further delay in the epoxy drying time, decline hardness abilities, or cause skid marks, whitening streaks, etc.
COATING METHOD:
Reinforce surface cracks, crevices, and joints between walls and fl oors with an epoxy joint filler product or putty before the first coat.
Apply with an industrial-grade fl oor trowel squeegee. Care should be taken since problems such as cratering may occur upon applying coating too thin. (2mm or less - 1 time)
Sanded primer is a must upon the ceramic or porcelain tile floor before applying the epoxy marble sand coating. It helps to cast over smoothly
