Product Features:
1. Premixed products, applied for stone/marble, only add water.
2. Remain open time, non slip, super adhesion strength.
3. Water resistant, good weather ability.
4. Long lasting service for 25 years.
5. Eco friendly and user friendly
Scope of Application
1. It is suitable to fix the large size of stone or marble onto the wall and floor of conventional
substrates, precast concrete panels, concrete, cement renders/screeds and plywood.
2. It can be applied directly onto the surface of porcelain tile or mosaic.
3. Indoor and outdoor use
Usage: 1.2kg/mm/㎡ , 20kg per bag can cover approx. 4 square meter for 4mm thickness adhesive.
Material: polymer cement based
|
CAS#
|
Chemical Name
|
%
|
|
65997-15-1 |
Portland Cement 42.5
|
30-40 |
|
14808-60-7 |
Silicone sand 70-140 |
50-60 |
|
Mixture |
Polymer Additive |
4.5-5.0 |
Packing : 20kg/bag or 25kg/bag
Technical Data:
|
Status |
Single component |
|
Powder |
Gray or white |
|
Consistency of mixing |
Paste |
|
Density of bulk kg/M3 |
1400 |
|
Density of mixture kg/M3 |
1500 |
|
Pot life |
Over 8 hours |
|
Open time (according to EN 1346) |
>30Min |
|
Adjust ability time |
Approx. 60mins |
|
Ready for grouting on wall |
After 4-8 hours |
|
Ready for grouting on floor |
After 24 hours |
|
Set to light foot traffic |
24 hours |
|
Ready for use |
14 days |
|
Construction |
Scrape |
|
Initial tensile adhesion strength |
2.1Mpa |
|
Initial tensile adhesion strength after water immersion |
1.5Mpa |
|
Open time: Tensile adhesion strength after not less than 10min |
2.2Mpa |
|
Open time: Tensile adhesion strength after not less than 20min |
2.4Mpa |
|
Extended open time: Tensile adhesion strength after not less than 30min |
2.1Mpa |
|
Tensile adhesion strength after freeze -thaw cycles |
1.5Mpa |
|
Tensile adhesion strength after heat aging |
2.3Mpa |
|
Deform ability according to EN12004 |
S1- Deform modulus |
|
Resistant to alkalic |
Excellent |
|
Resistant to oils |
Excellent |
|
Resistant to solvents |
Excellent |
|
Slip mm |
0.4 |
|
Temperature when in use |
-30℃- +90℃ |
|
Mixing water ratio |
Powder : water=100kg: 24L |
|
PH value |
Over 12 |
|
Shelf life |
12 months |
|
Application temperature on site |
5-40℃ |
YUNYANMIX C2TES1 tile adhesive is a kind of polymer mortar manufactured by YUNYAN company, YUNYANMIX is a well branded one of Top 10 for C2TES1 tile adhesive and new building chemicals in China, for a best supplier and wholesaler of new building chemicals please go through: http://www.yunyanchina.com
