Best Anti-static Epoxy Floor Coating From YUNYAN China Manufacturer and Supplier

  • Product Introduction
Posted by GUANGDONG YUNYAN SPECIAL CEMENT BUILDING MATERIALS CO.,LTD On Oct 22 2025

YUNYANMIX Anti-static Epoxy Floor Coating is manufactured by YUNYAN company, YUNYANMIX is a well branded one of Top 10 for cement grout and new building chemicals in China, for a best supplier and wholesaler of new building chemicals please go through: http://www.yunyanchina.com

Anti-static Epoxy Floor Coating has beautiful, dust-free, environmental protection, dense surface can resist a variety of chemicals. Epoxy floor to meet the requirements of environmental protection, is the enterprise ISO 14000 certification and pharmaceutical industry GMP certification, but can meet the use requirements, ensure the longevity of service life, in addition to the high quality floor materials and very perfect construction technology, high quality of concrete base is a very important guarantee factor, concrete foundation ground should have the following requirements:

l The concrete strength shall be above C20;

l The flatness requires the maximum height difference of 2M by ruler to be less than 3mm

l Concrete is collected by raw slurry, and the moisture content is less than 8%.

Epoxy resin anti-static floor composition:

1) base primer

2) medium coating

3) conductive putty layer, and

4) finish coating.

Product Features:

l Strong permeability

l Good sealing, with alkaline resistance

l Strong moisture-proof and bonding force

l Good miscibility.

Where to use :

Suitable for any indoor and outdoor floor base surface requiring epoxy floor paint.

Epoxy resin anti-static floor is suitable for factory enterprises (concrete ground, terrazzo ground, diamond ground, ceramic tile ground, cement wall surface), electronic and electrical products, ammunition warehouse and other required anti-static place coating use.

Technical Parameter:

No.s

Test Item

Test result

01

Status in container

Even and no hard lumps after mixing

02

Film appearance

The surface shall be flat without obvious shrinkage cavity, floating color, blooming, wrinkle, pinhole, crack, etc

03

Dry time

Semi dry H

5

Setting time H

24

04

Shore hardness (D)

78

05

Water resistance (168h)

No bubble,no peel, no color change

06

Anti static performance

Conductive range, Ω

≥1x10⁶~<1x10⁹

Featured Blogs

Tag:

  • Blog
Share On
Featured Blogs