YUNYANMIX Micro Cement Toppings is manufactured by YUNYAN company, YUNYANMIX is a well branded one of Top 10 for Micro Cement Toppings and new building chemicals in China, for a best supplier and wholesaler of new building chemicals please go through: http://www.yunyanchina.com

Product description:

Loft ground series is a whole ground seamless system with unique beauty, smooth surface, excellent wear resistance and natural texture. It is made up of modified polymer mortar and fast condensing material.

Product Feature:

1. Seamless and natural textured pattern.

2. High compressive strength and wear-resistance, low shrinkage.

3. Fast dry and harden

4. Premixed polymer cement product, add water only.

5. Eco friendly and user friendly.

Scope of Application

It can be applied in hotels, offices, retail stores, scientific research centers, exhibition halls, restaurants and other places with high requirements for design, beauty and wear resistance of the ground, which can be directly constructed on the ceramic tiles, marble and the base surface of the terrazzo. It is suitable for the reconstruction of the old ground.

Treatment of Base substrate

1. Concrete base must be strong enough to have sufficient compressive strength (at least 25 N / mm) and tensile strength (at least 1.5N / mm). Base substrate must be clean and dry without any contaminants (such as dust, oil, grease, coating or surface treatment materials). Relative humidity should not exceed 75%, and seal the moisture to prevent upward seepage. Flatness of the base substrate must reach the SP1 level. I f you have any questions, please do a small area test first.

2. Compressive strength: minimum 25 N/mm (C25 strength of fine aggregate concrete);

3. Pulling out strength is >2.0Mpas (Note: the fine aggregate concrete is added with 6Φ- 8Φ single layer two-way reinforcing steel, and the well is lined up 10x15cm).

4. Base surface reception evenness: 2m is less than 3mm in scale range;

5. Fine aggregate concrete needs to be grinding with mechanical.

6. The difference between the base level and finish coating should be controlled within the desired thickness for construction.

7. Basal surface moisture content limit: Coating should be made within water content <6% .

8. Environmental conditions: air humidity is less than 75%; air temperature: 5-30 degrees; base surface temperature: 8-25 degrees;

9. Other requirements: No crack, no empty drum and no sand appear from the concrete base substrate.

How to maintain and cure the topping:

Conditions and limits

Base substrate temperature：+15 min. / +30°C max.

Temperature on site：+15 min. / +30°C max.

Base substrate humidity content：≤ 4%

Air humidity：30%-75%

Dew point: be careful of condensation! The base and not solidified ground must be 3℃ higher than the dew point temperature, so as to reduce the risk of condensation or turning whiten on the ground coating.

Micro floor topping loft system consists from

1. Epoxy primer : YY-150A/B

2. Micro floor topping loft: YY-80

3. Polyurethane top coat sealer: YY-190WA/WB

Material:

Technical Data: